This is the tutorial page! Here you can learn how to mod Call of duty world at war!
There are 3 types of svg mods
.Single svg (Only one svg)
.Mod Menu( Lots of svg but more mods)
.scrolling (lots of sbg loads of mods but scolls up and down through mods)
Then for editing you can use either
.CodTool (Easy)
.HxD (Hex Editor) (Harder)
Single Savegame Mod
Requiments
1)Usb bigger than 1.5gb or a transfer cable
2) A laptop or a computer
3) A brain of some intelligince
4) Patience
Now to the modding
1)Configure your usb to your xbox (Go to your system settings, memory, then plug your usb into the usb port, once you see them word "Memory Unit"there press "A" on it somewhere it should say configure. (Make sure you back-up your files as it will overwrite them!!!!) Once it has configured load up COD WAW.
2)At the main menu press "A" then a tab should come up saying "Hard Drive" and "Cloud Storage" then "Memory Unit" press "A" on the memory unit.
3) Go onto the campaign and Press "A" on "NEW GAME" wait for it to load and then once "SAVING....." comes up press "START" then go down to "SAVE & QUIT" press "A" on that and "A" again on "SAVE & QUIT".
4)Once you are back at the main menu eject your usb.
5)Now extract your svg to the desktop.
6) Open up codTool (Download on download page)
7) Open your savegame and go to the advanced tab
8) You will see two boxes "setting" and "value".
KEY: set (type this in the setting box) i.e. set bind dpad_left god (don't type the set) and
Val (type this in the value box) i.e. player_sustainammo 1 (again don't type val in) between the 2 " " that is what you type in don't actually type them in though.
9) put this in the set box:"Activeaction"
then add this in val:"bind2 button_start vstr a"
10)Press the add setting button
11) set "vstr a"
12 val "vstr b;vstr c;vstr d;vstr e;vstr f;vstr g;vstr h;vstr i;vstr j"
13)Press the add setting button
14) set "vstr b"
15) val "bind dpad_right god;bind dpad_left give all;bind dpad_up noclip"
16) set "vstr c"
17) val "bind dpad_up dropweapon"
18) set "vstr d"
19) val "<any dvar>" don't type that in go to the dvar section ann find one and copy+paste it in there
20) for the next set you will do vstr e then f till j.
I hope you liked this tutorial.
How to Mod the MOTD (Message of the Day) with a USB/flash Drive
Requiments
1)Usb bigger than 1.5gb or a transfer
cable
2) A laptop or a computer
3) A brain of
some intelligince
4) Patience
Now to the
modding
1)Configure your usb to your xbox (Go to
your system settings, memory, then plug your usb into the usb port, once you see
them word "Memory Unit"there press "A" on it somewhere it should say configure.
(Make sure you back-up your files as it will overwrite them!!!!) Once it has
configured load up COD WAW.
2)At the main menu press "A" then a
tab should come up saying "Hard Drive" and "Cloud Storage" then "Memory Unit"
press "A" on the memory unit.
3) Go onto the campaign and Press
"A" on "NEW GAME" wait for it to load and then once "SAVING....." comes up press
"START" then go down to "SAVE & QUIT" press "A" on that and "A" again on
"SAVE & QUIT".
4)Once you are back at the main menu eject
your usb.
5)Now extract your svg to the
desktop.
6) Open up codTool (Download on download
page)
7) Open your savegame and go to the advanced
tab
8) You will see two boxes "setting" and "value".
KEY: set (type this in the setting box) i.e. set bind dpad_left
god (don't type the set) and
Val (type this in the value box)
i.e. player_sustainammo 1 (again don't type val in) between the 2 " " that is
what you type in don't actually type them in though.
9) put this
in the set box:"Activeaction"
then add this in val:"bind2
button_start vstr a"
10)Press the add setting
button
11) set "vstr a"
12 val "vstr b;vstr
c;vstr d;vstr e;vstr f;vstr g;vstr h;vstr i;vstr j"
13)Press the
add setting button
14) set "vstr b"
15) val
"bind dpad_right god;bind dpad_left give all;bind dpad_up
noclip"
16) set "vstr c"
17) val "bind dpad_up
dropweapon"
18) set "vstr d"
19) val "<any
dvar>" don't type that in go to the dvar section ann find one and copy+paste
it in there
20) for the next set you will do vstr e then f till
j.
21) On vstr I put set I and on val vstr motd1;vstr motd2;vstr motd3;vstr su
22) set su val killserver
23) set motd1 val g_motd ^1What Ever Text You Want
24) set motd2 val motd same text as before e.g motd ^1What Ever Text You Want
25) set mord3 val scr_motd ^1What Ever Text You Want
26)Save all changes then go onto your XBOX and resume the game press <start> and then save and quit
27) Back at the MAIN MENU you will see it says <What ever you put>
They You have managed to mod the MOTD with a USB
For More amazing Dvars Check out the Dvar Page more are going to be added soon....
Like Mod Gametype
Aimbot and many more.....
1)Usb bigger than 1.5gb or a transfer cable
2) A laptop or a computer
3) A brain of some intelligince
4) Patience
Now to the modding
1)Configure your usb to your xbox (Go to your system settings, memory, then plug your usb into the usb port, once you see them word "Memory Unit"there press "A" on it somewhere it should say configure. (Make sure you back-up your files as it will overwrite them!!!!) Once it has configured load up COD WAW.
2)At the main menu press "A" then a tab should come up saying "Hard Drive" and "Cloud Storage" then "Memory Unit" press "A" on the memory unit.
3) Go onto the campaign and Press "A" on "NEW GAME" wait for it to load and then once "SAVING....." comes up press "START" then go down to "SAVE & QUIT" press "A" on that and "A" again on "SAVE & QUIT".
4)Once you are back at the main menu eject your usb.
5)Now extract your svg to the desktop.
6) Open up codTool (Download on download page)
7) Open your savegame and go to the advanced tab
8) You will see two boxes "setting" and "value".
KEY: set (type this in the setting box) i.e. set bind dpad_left god (don't type the set) and
Val (type this in the value box) i.e. player_sustainammo 1 (again don't type val in) between the 2 " " that is what you type in don't actually type them in though.
9) put this in the set box:"Activeaction"
then add this in val:"bind2 button_start vstr a"
10)Press the add setting button
11) set "vstr a"
12 val "vstr b;vstr c;vstr d;vstr e;vstr f;vstr g;vstr h;vstr i;vstr j"
13)Press the add setting button
14) set "vstr b"
15) val "bind dpad_right god;bind dpad_left give all;bind dpad_up noclip"
16) set "vstr c"
17) val "bind dpad_up dropweapon"
18) set "vstr d"
19) val "<any dvar>" don't type that in go to the dvar section ann find one and copy+paste it in there
20) for the next set you will do vstr e then f till j.
I hope you liked this tutorial.
How to Mod the MOTD (Message of the Day) with a USB/flash Drive
Requiments
1)Usb bigger than 1.5gb or a transfer
cable
2) A laptop or a computer
3) A brain of
some intelligince
4) Patience
Now to the
modding
1)Configure your usb to your xbox (Go to
your system settings, memory, then plug your usb into the usb port, once you see
them word "Memory Unit"there press "A" on it somewhere it should say configure.
(Make sure you back-up your files as it will overwrite them!!!!) Once it has
configured load up COD WAW.
2)At the main menu press "A" then a
tab should come up saying "Hard Drive" and "Cloud Storage" then "Memory Unit"
press "A" on the memory unit.
3) Go onto the campaign and Press
"A" on "NEW GAME" wait for it to load and then once "SAVING....." comes up press
"START" then go down to "SAVE & QUIT" press "A" on that and "A" again on
"SAVE & QUIT".
4)Once you are back at the main menu eject
your usb.
5)Now extract your svg to the
desktop.
6) Open up codTool (Download on download
page)
7) Open your savegame and go to the advanced
tab
8) You will see two boxes "setting" and "value".
KEY: set (type this in the setting box) i.e. set bind dpad_left
god (don't type the set) and
Val (type this in the value box)
i.e. player_sustainammo 1 (again don't type val in) between the 2 " " that is
what you type in don't actually type them in though.
9) put this
in the set box:"Activeaction"
then add this in val:"bind2
button_start vstr a"
10)Press the add setting
button
11) set "vstr a"
12 val "vstr b;vstr
c;vstr d;vstr e;vstr f;vstr g;vstr h;vstr i;vstr j"
13)Press the
add setting button
14) set "vstr b"
15) val
"bind dpad_right god;bind dpad_left give all;bind dpad_up
noclip"
16) set "vstr c"
17) val "bind dpad_up
dropweapon"
18) set "vstr d"
19) val "<any
dvar>" don't type that in go to the dvar section ann find one and copy+paste
it in there
20) for the next set you will do vstr e then f till
j.
21) On vstr I put set I and on val vstr motd1;vstr motd2;vstr motd3;vstr su
22) set su val killserver
23) set motd1 val g_motd ^1What Ever Text You Want
24) set motd2 val motd same text as before e.g motd ^1What Ever Text You Want
25) set mord3 val scr_motd ^1What Ever Text You Want
26)Save all changes then go onto your XBOX and resume the game press <start> and then save and quit
27) Back at the MAIN MENU you will see it says <What ever you put>
They You have managed to mod the MOTD with a USB
For More amazing Dvars Check out the Dvar Page more are going to be added soon....
Like Mod Gametype
Aimbot and many more.....